A low power and low phase-noise 91~96 GHz VCO in 90 nm CMOS

This paper reports a 94 GHz CMOS voltage-controlled oscillator (VCO) using both the negative capacitance (NC) technique and series-peaking output power and phase noise (PN) enhancement technique. NC is achieved by adding two variable LC networks to the source nodes of the active circuit of the VCO. NMOSFET varicaps are adopted as the required capacitors of the LC networks. In comparison with the conventional one, the proposed active circuit substantially decreases the input capacitance (C_in) to zero or even a negative value. This leads to operation (or oscillation) frequency (OF) increase and tuning range (TR) enhancement of the VCO. The VCO dissipates 8.3 mW at 1 V supply. The measured TR of the VCO is 91~96 GHz, close to the simulated (92.1~96.7 GHz) and the calculated one (92.2~98.2 GHz). In addition, at 1 MHz offset from 95.16 GHz, the VCO attains an excellent PN of – 98.3 dBc/Hz. This leads to a figure-of-merit (FOM) of ?188.5 dBc/Hz, a remarkable result for a V- or W-band CMOS VCO. The chip size of the VCO is 0.75 × 0.42 mm², i.e. 0.315 mm².     

绿色住区参数化优化设计平台的开发进展与展望

绿色住区设计是建设宜居城市和实现节能减排目标的重要手段与方法。文章首先回顾绿色住区参数化优化设计方法及平台概况，在此基础上，重点介绍平面生成、噪声计算、通风计算、可视度计算等新增功能和天空遮挡算法升级，以及广州市的工程应用，最后展望平台研发与应用的未来发展方向。     

Bend,Twist, and Turn: First Bendable and Malleable Toughened PLA Green Composites

The future of green electronics possessing great strength and toughness proves to be a promising area of research in this technologically advanced society. This work develops the first fully bendable and malleable toughened polylactic acid (PLA) green composite by incorporating a multifunctional polyhydroxybutyrate rubber copolymer filler that acts as an effective nucleating agent to accelerate PLA crystallization and performs as a dynamic plasticizer to generate massive polymer chain movement. The resultant biocomposite exhibits a 24‐fold and 15‐fold increment in both elongation and toughness, respectively, while retaining its elastic modulus at >3 GPa. Mechanism studies show the toughening effect is due to an amalgamation of massive shear yielding, crazing, and nanocavitation in the highly dense PLA matrix. Uniquely distinguished from the typical flexible polymer that stretches and recovers, this biocomposite is the first report of PLA that can be “bend, twist, turn, and fold” at room temperature and exhibit excellent mechanical robustness even after a 180° bend, attributes to the highly interconnected polymer network of innumerable nanocavitation complemented with an extensively unified fibrillar bridge. This unique trait certainly opens up a new horizon to future sustainable green electronics development.     

济阳坳陷下古生界潜山油气藏特征及成藏模式

济阳坳陷下古生界潜山具有多样性、复杂性的特点，潜山差异性的形成演化、油气成藏主控因素和控藏模式不明确，严重制约了该区潜山油气勘探。在潜山分类的基础上，综合利用系统恢复、分类对比和典型解剖等方法，揭示了济阳坳陷下古生界不同类型潜山的形成演化过程和油气成藏主控因素差异性，分类建立了油气成藏模式。研究表明，济阳坳陷下古生界主要发育高位新盖侵蚀残丘潜山、中位古盖拉张断块潜山、中位新古盖拉张剪切断块潜山、中位中古盖挤压拉张断块潜山和低位古盖拉张滑脱断块潜山5种潜山类型。不同类型潜山的形成演化和油气成藏各具特色，其中，高位新盖侵蚀残丘潜山的发育受隆升、侵蚀作用控制，油气成藏主要受控于油源和盖层条件，表现为"单向供烃、砂体-不整合岩溶体联合输导、残丘控藏"的成藏模式；中位古盖拉张断块潜山的发育受掀斜、断裂作用控制，油气成藏主要受控于储集条件，表现为"单向供烃、顺向断层输导、反向断层控藏"的成藏模式；中位新古盖拉张剪切断块潜山的发育受反转、翘倾和走滑切割作用控制，油气成藏主要受控于输导条件，表现为"多源供烃、断溶体立体输导、断裂控藏"的成藏模式；中位中古盖挤压拉张断块潜山的形成受强烈挤压、拉张滑脱作用控制，油气成藏主要受控于储集条件，表现为"多源供烃、断缝体输导、断褶控藏"的成藏模式；低位古盖拉张滑脱断块潜山的形成受强烈拉张滑脱作用控制，油气成藏主要受控于输导条件，表现为"顶部供烃、断缝体输导、断裂控藏"的成藏模式。     

Automatic sorting of fresh tea leaves using vision-based recognition method

Mechanical tea harvesting using plucking machines is highly efficient, but harvested raw fresh tea leaves (FTLs) are always low quality because they contain a mixture of old leaves and leaf debris. To address this problem, this study developed an automatic sorting machine with a vision-based recognition method to extract high-quality FTLs from plucked raw FTLs. First, the raw FTLs were separated one by one after passing through three sequential conveyor belts with increasing speed, and were then classified into four grades using a vision-based recognition method. Finally, the FTLs were blown by air nozzles into collection boxes according to their specific grade. In the recognition method, the shape-based feature of each FTL is extracted by establishing the FTL's topological structure, and the support vector machine model is used for classification. The experimental results revealed that the vision-based recognition method performed satisfactorily with an accuracy rate of 94% and precision rate of 85%. The sorting success rate and efficiency of the automatic sorting machine were approximately 80% and 15 kg hr⁻¹, respectively. The results indicate that the developed automatic sorting machine can effectively and efficiently sort raw FTLs, which may improve the profitability and promote the automation of tea processing.     

基于LoRa物联网技术的智能照明控制方案在高速公路上的应用——以北京新机场高速公路(南五环-北京新机场)为例

文章结合北京新机场高速公路照明工程实例,阐述了常规照明控制系统的现状,分析了基于新兴的LoRa物联网技术智能照明控制方案的系统原理和系统构成、系统在高速公路智能照明控制领域的应用以及系统应用能达到的节能和管理效益的提升效果,并对系统的扩展应用前景做了研究分析。     

原油及馏分油脱酸技术进展

石油酸是原油和馏分油中普遍存在的腐蚀性物质，其主要成分为环烷酸并且含量可以高达90%以上。环烷酸具有羧酸的所有化学性质，所以常常造成严重的腐蚀，从而影响原油加工设备及油品使用设备的正常运行和使用寿命。随着近年来世界范围内高酸原油产量的逐渐增加，高原油及各种高酸值馏分油所带来的腐蚀与产品质量问题显得愈发严重，因此迫切需要开发出经济高效的脱酸技术与工艺路线。本文较为全面而详细地总结并评述了国内外原油及油品的各种脱酸技术方法。分析表明：目前所报道的各类脱酸工艺较多，其中工业应用的加氢脱酸效果虽好但是成本较高，而其他大多数脱酸方法都存在较多的缺点或不足，因此探寻一种绿色环保、经济高效并且具有较好普适性的油品脱酸工艺显得非常迫切而必要。酯化法脱酸具有加工工艺简单、不需要复杂的后继处理，几乎可以降低所有的高酸值原油和油品（轻质、重质馏分油以及渣油）的酸值，为原料油的进一步加工提供了方便。酯化脱酸工艺的关键在于高效催化剂的选择，而目前的催化酯化体系虽然脱酸率较高，但仍存在着反应时间较长的不足，相信通过反应过程强化等手段解决该问题以后，催化酯化脱酸工艺会被很快投入到原油及油品的脱酸实际工业生产中去。